The Wesco 8011751 is the spring for various Wesco Kickmaster waste bins. This spring has a hook on both sides, and it's common for one of these hooks to break, causing the pedal mechanism to stop working properly. In that case, you'll need a new spring.
Fits the following Wesco waste bins:
These waste bins always contain 2 springs. If one spring is broken, we recommend replacing both springs installed in the bin, so the pedal mechanism works evenly again and both springs are equally strong.
Dimensions
Length of spring coil (thick part): 50mm
Length incl. hooks: 67mm
Thickness: 7mm
Old part number: M1803123-1
How to install the spring
First hook one side of the spring into the hole of the white or black plastic ring. Then pull the spring out slightly and hook the other side onto the white plastic part attached to the pedal rod. Once you've reinstalled the springs, your Wesco bin will work properly again.
NOT SUITABLE FOR
Kickmaster CL (Kickmaster classic, with thickened base).
Check out the service video to replace the spring.
You should replace the spring when one of the side hooks breaks off. This is a common issue with the Wesco Kickmaster waste bin and causes the pedal mechanism to stop working properly. With a new spring, you can quickly and easily restore your bin's function yourself.
The Wesco Kickmaster waste bin always contains 2 springs that together drive the pedal mechanism. If one spring is broken, we recommend replacing both springs right away, so the tension is even on both sides again and your bin keeps working smoothly.
First hook one side of the spring into the hole of the white or black plastic ring. Then pull the spring out slightly and hook the other side onto the white plastic part attached to the pedal rod. Once both springs are installed, your Wesco bin will work properly again.
This spring fits the Kickmaster Classic Line 33 Litre (Art.No. 182631), the Kickmaster with damper (Art.No. 184631 or 184634), the Kickmaster without damper (Art.No. 180631 or 180634), and the Kickmaster Maxi 40 Litre (Art.No. 180731). This spring is not suitable for the Kickmaster CL with thickened base.
No, this spring is not suitable for the Kickmaster CL, also known as the Kickmaster classic with thickened base. For that model, you'll need a different part, which you can find under the Kickmaster CL parts on our website.
The spring has a length of 50mm at the thick part of the coil and 67mm including the hooks on both sides. The thickness of the spring is 7mm. The old part number for this spring is M1803123-1.
View all reviews from our customers below
Uitstekende service en makkelijk te vervangen en werkt prima
Prima service, wel nog een tip. Vaak zijn beide veren aan vervanging toe en dat ontdekte ik pas toen ik de eerste vervangen had. Geef eventueel aan dat er 2 veren nodig zijn.....
Heel goede service en goed ( voor het milieu èn portemonnee) dat de mogelijkheid er is om onderdelen te vervangen!
Was fijn om enkel een veer te vervangen en niet de gehele afvalbak.
Scheelt geld en tegenwoordig zegt men dan" duurzaam".
Ik noem het gewoon ouderwetse service en ben er blij mee
Great to have a site with replacement parts so you can extend the life of your Wesco bin. The parts fitted perfectly and arrived quickly. Very helpful to have a video to show how to replace the springs. Gave the bin a good clean at the same time and looks new – must be 10 years old now.
All ok
Snel geleverd werkt top.
Nieuwe veren besteld voor onze kickmaster.
Snel geleverd en de kickmaster opent en sluit weer als nieuw.
Lieferung war in ordnung. Die Federn passen einwandfrei.
Snel verstuurd en makkelijk te vervangen.
You can contact us and ask your question via the options below.
What do you think of the article?